Constellation™
Scarifier System
Smarter design from the inside out. A precision drum, replaceable wear segments, and bottom-mounted PDC bullets — one system you configure for any width, any profile, any job.
Request a Quote
One System, Any Job
Modular design
Configure your drum for any width and application. Choose how many segments to mount and what bullet types to run — full control over cut width and cutter style.
Replaceable wear segments
Segments take the wear; your drum stays protected. Easy to replace, affordable, and they shield the high-value drum from abrasion and impact.
Bottom-mounted bullets
Bullets bolt in from underneath the segment — shielding bolt heads from cutter wash and eliminating the usual headaches of swapping worn bullets.
Distributed cutter pattern
Six independent cutter positions per inch — double the industry standard — for smoother results, more even texture, and longer cutter life.
Grinder Bullets & Cutters
Rear-loaded PDC grinder bullets with optimized back-rake geometry. Mounts in industry-standard drums or bottom-bolts into the Constellation drum. Mix profiles across the drum to tune your grind.
Profile 01Single Row
General-purpose grinding with an even, consistent finish.
Profile 02Square Profile
Flat-bottom passes for uniform depth and clean edges.
Profile 03Mixed Profile
Combined geometries for aggressive removal with a smooth surface.
What It's For
Inset striping grooves
Grind a shallow recess so thermoplastic, tape, or epoxy striping sits below the plow line — markings that survive winter in snow states instead of being scraped off.
Marking & coating removal
Strip thermoplastic, paint, and coatings from asphalt and concrete with a consistent, controlled texture.
Slot cuts for recessed markers
Cut slots for snowplowable raised pavement markers, so reflective markers keep working through winter maintenance.
